.png){kind=small}
TALOS C750
Anti-terrorism retractable oil-hydraulic bollard
​
GENERAL DESCRIPTION
Security bollard tted with a post, that retracts completely at with the road level, and an incorporated oil-hydraulic motor-pump. Suitable for heavy duty applications being certified and tested in compliance with:
- ASTM F2656-15 C750
- PAS 68:2013 V/7500 (N3)/80
- IWA 14-1:2013 V/7200 [N3C]/80
The bollard is designed and constructed to be able to stop vehicles weighing 7.500 kg, running at a speed of 80 km/h and to absorb at least 1.872.000 Joules of energy, in compliance with the ASTM F2656-15, PAS 68:2013 and IWA 14-1:2013 standards. This bollard is designed for the protection of special areas, such as: military bases, airports, embassies, consulates, banks, prisons, etc. and all those areas requiring a high level of security and perimeter protection.
The bollards is tted with a post (cylinder) rising 1.100 mm from ground level, diameter 350 mm, thickness 30 mm. The post of the bollard (when in fully raised position) remains 50 cm (constraint) inside the enclosure and is supported by two reinforcement plates, the thickness of each is 30 and 30 mm respectively. The post is made of S355K2H steel, the surface is cataphoresis treated and coated by polyester powder; the post of the bollard is well visible in any climate conditions, being tted with an approved, back-reecting band sticker. The post head is completed with a rubber edge providing protection in case of accidental impacts with pedestrians, etc. The foundation casing is made of treated steel, hot dip galvanized, while the structure of the inner assembly of the bollard is cold dip galavanized.
Post diameter (mm)
​
Post tickness (mm)
Post height (mm)
​
Post finish
​
Piston diameter (mm)
​
Shaft diameter (mm)
​
Actual shaft travel (mm)
​
Frequency of use
​
Post material
​
Impact resistance (J)
​
Crash resistance (J)
​
Maximun static load (kg)
​
Environment working temperature
​
Environment working temperature with heater
​
Rising speed
​
Lowering speed
​
Lowering speed rapid descent system
​
Ø 355
​
30
​
1.100
​
polyester powder coating
RAL 7016 anthracite grey
​
35
​
25
​
1.115
​
intensive (2.000 cycles/day)
​
S355K2H steel
​
700.000
​
2.000.000
​
20.000
​
-20 °C +80 °C
​
-40 °C +80 °C
​
22 cm/s (~ 5,0 s)
​
22 cm/s (~ 4,9 s)
​
