TALOS M30

Automatic bollard for perimeter security

Automatic oil-hydraulic system, 230 Vac

PERIMETER SECURITY

Intended for traffic control and protection of those sensitive areas where a high level of perimeter security is needed. Designed on the basis of the ASTM F2656-07, PAS 68:2013, IWA 14-1 specifications.

OIL-HYDRAULIC

Hydraulic locking device in standing position (standard) and emergency manual lowering by a release spanner supplied with the equipment. Burglar-proof cover plate preventing the release system from being accessed and thus the bollard from being lowered.

STRONG

Scratch-proof cataphoresis treated and polyester powder coated steel rising cylinder. Available also with an AISI 304 stainless steel cover sleeve, thickness 12/10. Breakout resistance: 700.000 J.
Connector and junction box IP 66 for cabling. Hall effect limit switch sensors, cylinder head with rubber edge and incorporated LED lights.

VERSATILE

A vast range of command and safety accessories allow for reliable and precise control of the installations. Beeper to signal the movements. Heating device for installations in very low temperature conditions -40 °C where snow and ice are frequent. The electronic control unit can be set so that it can manage several bollards at a time.

Cylinder diameter (mm)

Cylinder thickness (mm)

Cylinder height from ground (mm)

Cylinder material

Cylinder treatment and finishing

Pit

Rising time (s) [cm/s]

Lowering time (s) [cm/s]

Working temperature (°C)

Oil type

Power supply (Vac – Hz)

Absorbed power (W)

Absorbed current (A)

Grade of protection IP / motor-pump

Frequency of use (cycles/day)

Impact resistance (J)

Breakout resistance (J)

Maximum static load (kg)

275

800

S355J2H steel

cataphoresis and polyester powder coating RAL 7016
AISI 304 brushed SS steel sleeve

hot dip galvanization

~4,50 [18]

~3,42 [23]

-20 ÷ +80
(-40 with heater)

708L

230 - 50

1.100

1,8 ÷ 3.5

heavy duty / 2.000

150.000

700.000

20.000

Fully retractable, heavy duty, automatic bollard consisting of an oil-hydraulic motor-pump unit incorporated inside the main structure and an oil-hydraulic actuator inside the moving cylinder. Suitable for the protection of sensitive areas where a high level of perimeter security is needed, designed to withstand a vehicle of 6.8 t at a speed of 50 km/h. IP 67. Height is 800 mm from ground level. Scratch-proof S355J2H steel cylinder, thickness 12 mm and ø 275 mm, cataphoresis treated and polyester powder coated (an AISI 304 brushed stainless steel cover sleeve also available). Cylinder head made of aluminium fitted with rubber edge and 12 amber-colour integrated LED lights, burglar-proof cover plate made of cataphoresis treated aluminium. Head and cover plate are slip-proof and tread resistant. Moving cylinder fitted with an approved retro-reflecting, high intensity micro-prismatic adhesive film (h 80 mm). Hot-dip galvanized steel pit. Release spanner with a triangular socket allowing manual lowering in an emergency. Impact resistance 150.000 J, breakout resistance 700.000 J, static load max 1.500 kg (bollards in raised position), max 20.000 kg
(lowered). Working temperature -40 ÷ +80 °C. Supply voltage 230 Vac ± 10%, 50 Hz. Absorbed power 1.100 W. Rising time ~ 4,50 s. Intensive use 2.000 cycles/a day.